1. ATTENTION EXISTING USERS: If this is your first visit to the new forum, you must reset your password. Please go to http://cobrakitcar.net/lost-password to reset your password.

    Dismiss Notice

Four link mounting

Discussion in 'UCC - Discounted New/Used Parts' started by Roush #1, Feb 7, 2009.

  1. Roush #1

    Roush #1 Member

    How is everyone running their four link system?

    My top link is in the top hole on both the frame and rear end side and the bottom link is in the bottom hole on the frame end and the top hole in the rear end.

    The links are the standard Lone Star 7" on the top and 9" on the bottom.

    They are not parallel to each other or to the ground.

    They are 8 1/4" apart on the frame and 9" apart on the rear end.

  2. Lawler

    Lawler Active Member


    Here is a link to my chassis video. My links are in the top holes on the frame and rear end on the top. The links are in the bottom holes on the frame and rear end underneath. My panhard bar is paralell with the ground.

    http://video.google.com/videoplay?docid ... 7780&hl=en


Share This Page